电梯门套尺寸需根据载重、安装要求及设计规范综合确定，具体如下：

　　The size of the elevator door frame needs to be determined comprehensively based on the load capacity, installation requirements, and design specifications, as follows:

　　一、核心尺寸标准

　　1、 Core size standard

　　常规尺寸

　　Regular size

　　宽度 ：800mm（800kg载重）→ 900mm（1000kg载重）→ 1000-1200mm（更高载重）

　　Width: 800mm (800kg load) → 900mm (1000kg load) → 1000-1200mm (higher load)

　　高度 ：通常与电梯轿厢高度一致，标准范围2.1-2.3米

　　Height: usually consistent with the height of the elevator car, with a standard range of 2.1-2.3 meters

　　特殊场景要求

　　Special scenario requirements

　　别墅/高档住宅 ：可预留1100-1400mm宽度

　　Villas/upscale residences: can reserve a width of 1100-1400mm

　　5T以上载重 ：需设置2000mm以上宽度

　　Load capacity above 5T: A width of 2000mm or more must be set

　　二、安装与设计要点

　　2、 Key points of installation and design

　　门洞预留

　　Reserved door opening

　　建筑设计需预留比标准门宽多200-300mm的洞口，例如800kg载重需预留1000-1200mm

　　Architectural design needs to reserve openings 200-300mm wider than standard doors, such as 1000-1200mm for a load capacity of 800kg

　　侧板宽度

　　Side panel width

　　通常为30cm以内，需根据门洞与侧板间距调整

　　Usually within 30cm, it needs to be adjusted according to the distance between the door opening and the side panel

　　材料与风格影响

　　The influence of materials and style

　　不同材质（如铝合金、不锈钢）和装修风格（欧式/中式）可能影响尺寸选择

　　Different materials (such as aluminum alloy, stainless steel) and decoration styles (European/Chinese) may affect size selection

　　三、注意事项

　　3、 Precautions

　　国标规范 ：GB7588-2003未明确门套尺寸，需结合施工图纸和设备厂家要求

　　National standard specification: GB7588-2003 does not specify the size of the door frame, and it needs to be combined with the construction drawings and equipment manufacturer requirements

　　精准测量 ：采用“零误差测量法”，确保侧板与门框间距匹配，避免施工误差

　　Accurate measurement: using the "zero error measurement method" to ensure that the distance between the side panel and the door frame matches, avoiding construction errors

　　建议根据具体载重、建筑结构及设计需求，与专业团队确认最终方案。

　　Suggest confirming the final plan with a professional team based on specific load capacity, building structure, and design requirements.

　　本文由  济宁电梯门套加工定制 友情奉献.更多有关的知识请点击  http://m.weixindf.cn/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jining Elevator Door Frame Processing Customization For more related knowledge, please click http://m.weixindf.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.